950C

Price:

Availability:

Availability: In stock

Email to a Friend

Product Description


 

The 950 Traveling Tail is part of the 900 Series. The 950 is 50-Ton capacity and has three 25,000# axles . The 950 offers tail lengths of 12' or 15' tails and 45', 48' and 51' overall lengths. The 950 offers the same rugged four beam construction and other outstanding features of the 900 Series - standard powder coat paint, stable rigid dock arm, tail-lifting capacity of 24,000 lbs. and centralized grease system. Landoll is the only trailer manufacturer to offer powder coat paint on large trailer frames. WHY OWN A 900 SERIES Quick, simple, safe operation and a longer wheelbase that increases payload. A 15' tail reduces the load angle to a low 11°. Frames are steel shot blasted in preparation for the TGIC polyester powder coat paint finish standard on 900 Series trailer. The tail can raise and lift 24,000 lbs up to 57" dock height. The 900 Series is backed by a 5-year structural warranty.

 

Model Capacity* Deck Axles Tires & Ply Rating
950C-45-12 50 Ton 102 3 (12) 235/75R 17.5 LRH
950C-48-12 50 Ton 102 3 (12) 235/75R 17.5 LRH
950C-48-15 50 Ton 102 3 (12) 235/75R 17.5 LRH
950C-51-15 50 Ton 102 3 (12) 235/75R 17.5 LRH

 

Photos may show optional equipment

 

 

STANDARD EQUIPMENT  
*Capacity: 100,000 Lbs.
Deck Rating: 70,000 Lbs. In 10 Foot
Estimated Base Weight: 19,890 Lbs. (51')
Main Frame: Fabricated 80,000 PSI Yield 4 Beam Design
Crossmembers: 4" Junior I-Beam on 8" Centers
Slope Drop: 90 Degree
Parking Stands: Jost Two Speed
Tires: 235/75R 17.5 LRH Double Coin
Rims: 17.5 x 6.75 Tubeless
Wheels: Hub Pilot/Steel Outboard Brake Drums
Axles: 3- 25,000 Lb. Tandem Dual Tire, Oil Bath Bearings
Suspension: Neway RLU228 Air Ride 22,500 Lb. Capacity with Manual Dump Valve
Brakes: 12.25 x 7.5 Full Air/Spring Brakes 4S2M (Two Rear Axles) ABS Center Axle Indirect
Oil Seal Hubs: Internal Mated Assembly
Hitch: Fifth Wheel King Pin
Pin Setting: 18 Inches
Swing Clearance: 86 Inches
Loaded Ground Clearance: 20 Inches
Loaded Deck Height: 38 Inches
Width 102 Inches
Decking: 1 3/8" Apitong Hardwood
Air/Electrical: 7 Way Receptacle
Tool Box: Twin Upper Deck Mounted with Lockable Door (7"H x 34"H x 29"D)
Hydraulic Hook Up: Quick Couplers 2500 PSI/ 14 GPM
Lights: Grote "SuperNova" LED-10 year warranty
Wiring Harness: Grote "Ultra-Blue Seal" - 7 year warranty
Finish: Steel Grit Shot Blast to Bright Metal
Powder Coat Color: White/Black/Yellow/Blue/Red/Green
Decals: Hi-Visibility Reflective Package
Tie Downs: Double Key Hole Chain Slots on 16" Centers/ 6 Double Key-Hole Chain Slots on Tail
Tail Lifting Capacity: 24,000 Lb.
Hydraulic Winch: Upper Deck Worm Gear 12,000 Lb. With 85' of 1/2" Cable with Wear Plate
Load Angle: 11 Degree with 15' Tail
Undercarriage: Centralized Grease System
Features: Automatic Slack Adjusters, Flat Approach Plate, Apitong Wood Covered Tail
Hydraulic Valve Body: Prince Electronic
*Capacity ratings are frame capacities only. Actual load capacities may be restricted by factors such as gross axle weight ratings (GAWR) or state and federal regulations. Maximum Capacity must be over Entire Length of Trailer.

 

Specifications subject to change without notice.

*Indicates dimension may change due to options indicated.

 

OPTIONAL EQUIPMENT

 

BULKHEADS:
16"/24" 2 - Position Bulkhead/Front Extension (Solid) (1500# Capacity 3000# Distributed)Powder Coated Black  
48" High Mesh 102" Powder Coated Black  
Bolt-On Binder Storage Rack for 48" Bulkheads  
LED Work Light - Dual (Mounted on Bulkhead)  
Spare Tire Carrier - 48" Bulkhead, Front Mounted  
Spare Tire Carrier - 48" Bulkhead, Rear Mounted  
 
PARKING STANDS:
Pin Drop in Lieu of Std  
 
SLOPE RAMP:
6' Upper Deck Ramp (Air Operated) (10,000 lb. Capacity) (11.5 deg Load Angle)  
5 Ft. Aluminum Ramps - Portable (8,000 Lb. Capacity - Each)  
Landoll Traction Ramps (steel)  
 
TIE DOWN RINGS:
Flush Mounted "D" Rings (Each)  
"D" Ring Bolt on at Winch (Each) (Two Locations Available)  
Recessed Mounted "D" Rings (Each)(Not Totally Recessed with Additional Crossmembers)  
 
WINCH AND ACCESSORIES:
20,000 Lb. Worm Gear Winch in Lieu of 12,000 Lb. Std. Upper Deck  
15,000 lb. Planetary Winch in lieu of 12,000 lb. Std. Upper Deck  
Delete Standard 12,000 Lb. Winch  
Guard, Winch 12/20K (cannot be used in conjunction with Pivoting Cable Roller Guide)  
Cable Roller Guide for Winch - 12,000 Lb., 15,000 Lb. Or 20,000 Lb. Slope or Upper Deck  
Pivoting Cable Roller Guide for Winch with Air Tension and Air Release - 20,000 Lb. Upper Deck Mount Only  
Wireless Remote Control - Six Function for Prince valve "B Model"  
 
DECK AND ACCESSORIES:
Steel Landoll Traction Plate over Wood on Tail Only  
Steel Landoll Traction Plate over Approach Plate  
Traction Bars for Tail - Bolt-on (Bolts Included) 12' Tail (24 Pieces, 10" spacing) (Recommended When Loading Track Equipment)  
Traction Bars for Tail - Bolt-on (Bolts Included) 15' Tail (30 Pieces, 10" spacing) (Recommended When Loading Track Equipment)  
Extra Web Mounted LED Lights  
Lower Deck Bolt-On Lockable Tool Box (Curb Side or Street Side)(42" W x 28" D x 9" H)  
Swing Out Side Flashing/Marking Lights (1) Pair  
  - Box, Lower Deck behind Center Turn Light
 
 
SUSPENSION:
Air Weigh Digital Scale System QuickLoad  
 
HYDRAULIC POWER SOURCE:
Air Shift PTO & Wet Kit for Tractor - Not Installed (30 Gallon Tank Required)  
Installation of PTO & Wet Kit (Control)  
Polished Aluminum Hyd. Tank,(19"Wx24D") (Side Mt.) in Lieu of STD  
Hydraulic Engine Package - Upper Deck w/Cover Kohler 27 HP Gas  
Hydraulic Quick Couplers 1 Male/ 1 Female (Matches Trailer) (Part # 105902)  
 
TIRES AND RIMS:
235/75R 17.5 Michelin Tires in Lieu of STD  
255/70R22.5 Double Coin Tires in lieu of STD 235/75R 17.5  
255/70R 22.5 Michelin Tires in Lieu of Std 235/75R 17.5  
Spare Michelin Tire & Hub Pilot Type Rim (235/75R 17.5)  
Spare Double Coin Tire & Hub Pilot Type Rim (255/70R 22.5)  
Spare Michelin Tire & Hub Pilot Type Rim (255/70R 22.5)  
17.5 Aluminum Wheel (8 Bolt Polished) in Lieu of Std. (Each)  
17.5 Aluminum Wheel (8 Bolt Machined) in Lieu of Std. (Each)  
22.5 Aluminum Wheel (10 Bolt Polished) in Lieu of Std. (Each)  
22.5 Aluminum Wheel (10 Bolt Machined) in Lieu of Std. (Each)  
Hubometer  
Pressure Guard Air Inflation  
Crossfire Air Equalizers (Price Per Axle)  
 
SPECIAL PRICES:
Hot Dip Galvanizing (Trailer Frame is Totally Submerged) -Adds minimum of 3 weeks to delivery  
Paint over Galvanizing-Sides Only with STD Colors Only  
Paint over Galvanizing-Top Surface Only with STD Colors Only  

Special Paint: Contact Factory

 

© 2013 TNT Trailer Sales. All Rights Reserved.