Arctic Lite



Availability: In stock

Email to a Friend

Product Description

General: Insulation: 2” sidewall, 2” floor, 2” roof

                Dimensions: 53’ x 102-3/8 x 13’6”

                Front interior height: 105-3/4”

                Rear interior height: 106”

                Interior width sidewall to sidewall: 97-3/8”

                GVWR: 68,000 lb. / 30,845 kg

                GAWR: 20,000 lb. / 9,072 kg

Nose/Coupler: 4” coupler

                 3/16” x 50K approach plate with full approach angle, .250” x 50K grid plate

                 Kingpin with zinc anodes corrosion protection

                 One-piece Extruded aluminum header

                 5" radius corner post constructed with .125" heavy-duty extruded aluminum

                 Trailer refrigeration unit (TRU) frame with three vertical aluminum lower Z-posts, two vertical outboard steel posts and an aluminum upper/lower                         header

Sidewalls: Pre-painted .040 aluminum exterior side sheets

                 Heavy-duty 1” aluminum “Z” posts on 24” centers / 12” centers in rear and over landing gear

                 Seamless Versitex® VR080” thermoplastic interior liner

                 12” Versitex VR8 integral to interior liner, no exposed fasteners

                 Smooth sidewalls with 4”-8” pattern

                 Floor System: 16,000-lb. dynamic load rating

                 Full, 1-1/4” thick heavy-duty extruded aluminum duct floor

                 4” steel crossmembers on 12” centers in bay, 8” centers in rear 5’

                 Fork lift reinforcement: 36” aluminum “I-inserts” in center 72” of floor at rear

                 High-density polyurethane (HDPE) composite floor stringers installed with eight 5/16” screws per crossmember

                Single piece .030” Versitex thermoplastic subpan

                Gutters and drains at the front and the rear

                Steel materials pre-coated prior to installation

Roof System: 1/8” aluminum doubler plate at front

                .060” fiberglass lining

Rear: Brushed-finish stainless steel frame

               Carbon steel rear impact guard with outboard vertical bumper legs meets U.S. Department of Transportation and Transport Canada requirements

               5/16” steel base plate in rear sill with 1/2" post protection

               Eyebrow and vertical light protection

               3-1/2”rear header with integral gutter

               3” insulated swing doors / 4 aluminum hinges per door, 1 lock rod per door

               4-flange door seal with 3-chamber airlock

               Vertical aluminum hat channel with cover plate for exterior hardware attachment

               Undercarriage: SAF UltraLite™ mechanical suspension or Hendrickson VANTRAAX® HKANT 40 air suspension with Hendrickson QUIK-DRAW®

              Meritor® axle with parallel “P” spindle wheel ends

              Meritor MA212 long-life brake linings

              Haldex Gold Seal® brake chamber with S-ABA slack adjuster

              Maxion Wheels 5HH white powder-coated lightweight steel wheels

              Intercostal crossmember bracing with JOST landing gear

Lights/Electrical: All LED lights

              Wabash National 3.0 Sealed Harness System

© 2013 TNT Trailer Sales. All Rights Reserved.