DuraPlate XD-35

Price:

Availability:

Availability: In stock

Email to a Friend

Product Description

General:  Dimensions: 53’ x 102-3/8 x 13’6”
                  Front interior height:  110-1/4”
                  Rear interior height:  111-1/4”
                  Interior width sidewall to sidewall: 100-5/8”
                  GVWR: 68,000 lb. / 30,845 kg
                  GAWR: 20,000 lb. / 9,072 kg

 Nose/Coupler:  Specially designed, high-strength coupler
                  3/16” x 50K approach plate with .290” x 50K grid plate
                  Kingpin with zinc anodes corrosion protection
                  One-piece extruded aluminum header
                  5" radius corner post constructed with .125” heavy-duty extruded aluminum
                  6-post nose with structural corner posts, hat channels mounted with four 5/16” steel bolts and 1/4” rivet connections around perimeter
                  7.5mm x 12” DuraPlate® lower nose scuff riveted to nose panel
                  Heavy-duty, 3/16” stainless steel lower nose rail

Sidewalls: DuraPlate composite panels with a limited 10-year warranty*  
                 Flat seam design allows top rail connection to the outside panel
                 Logistics on 50” vertical centers
                 Integral A-slots punched on 4-1/2” centers
                 Extruded aluminum lower 22” interior/exterior integrated panel
                 DuraPlate panels made in the U.S.A

Floor System:  35,000-lb. dynamic load rating
                 Full, 1-3/8” thick laminated oak floorboards installed with three screws per board, per crossmember
                 4” steel crossmembers on 8” centers, seven crossmembers over landing gear

                 Steel bolted crossmember attachment
Roof System:  .040” aluminum roof sheet wrapped over top rail edge
                 18-gauge steel anti-snag roof bows mounted on 24” centers

Rear:  Carbon steel with ultra high-zinc epoxy primer and polyester power-coated for corrosion resistance. Galvanized and stainless steel options available.

                Carbon steel rear impact guard with outboard vertical bumper legs meets U.S. Department of    Transportation and Transport Canada                                          requirements
                 5/16” steel base plate in rear sill with 1/2" post protection
                 Eyebrow and vertical light protection
                 3-1/2” rear header with integral gutter
                 DuraPlate composite swing doors with aluminum 4-hole hinge / five hinges per door
                 TrustLock Plus® System comprised of a lower sill design and a lock rod with integral door holdback, 1 per door
Suspension: 
SAF UltraLite™ mechanical suspension or Hendrickson VANTRAAX®HKANT 40 air suspension with Hendrickson QUIK-DRAW®
                 Meritor® Axle with parallel “P” spindle wheel ends
                 Meritor MA212 long-life brake linings  
                 Haldex Gold Seal® brake chamber with S-ABA slack adjuster   
                 Maxion Wheels 5HH white powder-coated lightweight steel wheels
                 Intercostal crossmember bracing and JOST landing gear
Lights/Electrical: All LED lights

© 2013 TNT Trailer Sales. All Rights Reserved.