DuraPlate

Price:

Availability:

Availability: In stock

Email to a Friend

Product Description

General:  Dimensions: 53’ x 102-3/8” x 13’6”

                  Front interior height: 110-1/4”

                  Rear interior height: 111-1/4”

                  Interior width sidewall to sidewall: 101

                  GVWR: 68,000 lb. / 30,845 kg

                  GAWR: 20,000 lb. / 9,072 kg

Nose/Coupler: 4” coupler

                  3/16” x 50K approach plate with.290”x 50K grid plate

                  Kingpin with zinc anodes corrosion protection

                  One-piece extruded aluminum header

                  5" radius corner post constructed with .125” heavy-duty extruded aluminum

                  6-post nose with structural corner posts, hat channels mounted with four 5/16” steel bolts and 1/4” rivet connections around perimeter

                 Heavy-duty, 3/16” stainless steel lower nose rail

Sidewalls:  DuraPlate composite panels with a limited 10-year warranty*

                 Flat seam design allows top rail connection to the outside panel Recessed logistic seam on 50” vertical centers rated at 1,880 lb. working load

                 Integral A-slots punched on 4-1/2” centers

                18-gauge x 80K steel scuff liner fastened to sidewalls on 8” centers with stainless steel rivets

                 DuraPlate panels made in the U.S.A.

Floor System:  20,000-lb. dynamic load rating

                  Full, 1-3/8” thick laminated oak floorboards installed with 3 screws per board, per crossmember

                  4” steel or aluminum crossmembers on 12” centers in bay, steel crossmembers over sub frame and landing gear, 8” centers in rear 2’ Steel                                bolted crossmember attachment

Roof System:  .040” aluminum roof sheet wrapped over top rail edge

                  18-gauge steel anti-snag roof bows mounted on 24” centers

Rear Frame:  Carbon steel with ultra high-zinc epoxy primer and polyester powder-coated for corrosion resistance. Galvanized and stainless steel options                         available.

                   Carbon steel rear impact guard with outboard vertical bumper legs meets U.S. Department of Transportation and Transport Canada                                               requirements

                   5/16” steel base plate in rear sill with 1/2" post protection

                   Eyebrow and vertical light protection

                   3-1/2” rear header with integral gutter

                   DuraPlate composite swing doors with aluminum 4-hole hinge / five hinges per door

                   TrustLock Plus® System comprised of a lower sill design and a lock rod with integral door holdback, 1 per door

Suspension:  SAF UltraLite™ mechanical suspension or Hendrickson VANTRAAX®HKANT 40 air suspension with Hendrickson QUIK-DRAW®

                   Meritor® axle with parallel “P” spindle wheel ends

                   Meritor MA212 long-life brake linings

                   Haldex Gold Seal® brake chamber with S-ABA slack adjuster

                   Maxion Wheels 5HH white powder-coated lightweight steel wheels

                   Intercostal crossmember bracing and JOST landing gear

Lights/Electrical:  All LED lights

                   Wabash National 3.0 Sealed Harness System

© 2013 TNT Trailer Sales. All Rights Reserved.