Sheet & Post



Availability: In stock

Email to a Friend

Product Description

General:  Dimensions: 53’ x 102-3/8 x 13’6”

                  Front interior height: 110-1/4”

                  Rear interior height: 111-1/4”

                  Interior width sidewall to sidewall: 98-7/8”

                  GVWR: 68,000 lb. / 30,845 kg

                  GAWR: 20,000 lb. / 9,072 kg

Nose/Coupler:  4” coupler

                  3/16” x 50K approach plate with .290” x 50K grid plate

                  Kingpin with zinc anodes corrosion protection

                  One-piece extruded aluminum header

                  5" radius corner post constructed with .125” heavy-duty extruded aluminum

                  6-post nose with structural corner posts, hat channels mounted with four 5/16” steel bolts and 1/4” rivet connections around perimeter

                 Heavy-duty, 3/16” stainless steel lower nose rail

Sidewalls:  .050” pre-painted smooth aluminum sidewall

                 5” x 1-1/4” x 18-gauge steel hat post with 1/4” thick plywood liner

                 18-gauge x 80K scuff liner fastened to sidewalls on 24” centers with additional 12” centers in high stress areas

Floor System:  20,000-lb. dynamic load rating

                  Full, 1-3/8” thick laminated oak floorboards installed with three screws per board, per crossmember

                 4” steel or aluminum crossmembers on 12” centers in bay, steel crossmembers over sub frame and landing gear, 8” centers in rear 2’ Steel                            bolted crossmember attachment

Roof System: .040” aluminum roof sheet wrapped over top rail edge

                18-gauge steel anti-snag roof bows mounted on 24” centers

Rear Frame:  Carbon steel with ultra high-zinc epoxy primer and polyester power-coated for corrosion resistance. Galvanized and stainless steel available.

                 Carbon steel rear impact guard with vertical bumper legs meets U.S. Department of Transportation and Transport Canada requirements

                 5/16” steel base plate in rear sill with 1/2" post protection

                 Eyebrow and vertical light protection

                 3-1/2” rear header with integral gutter

                 DuraPlate® composite swing doors with aluminum 4-hole hinge / five hinges per door

                 TrustLock Plus® System comprised of a lower sill design and a lock rod with integral door holdback, 1 per door

Suspension:  SAF UltraLite™ mechanical suspension or Hendrickson VANTRAAX®HKANT 40 air suspension with Hendrickson QUIK-DRAW®

                 Meritor® axle with parallel “P” spindle wheel ends

                 Meritor MA212 long-life brake linings

                 Haldex Gold Seal® brake chamber with S-ABA slack adjuster

                 Maxion Wheels 5HH white powder-coated lightweight steel wheels

                 Intercostal crossmember bracing and JOST landing gear

Lights/Electrical: All LED lights

                 Wabash National 3.0 Sealed Harness System

© 2013 TNT Trailer Sales. All Rights Reserved.